D-Link DIR-608 User Manual page 26

Section 3 - Configuration
Configure the Wireless settings and click Next.
Disable the Enable SSID broadcast if you want the router to transmit its SSID
publicly so other wireless devices can discover it. Note: Disabling
wireless radio.
SSID broadcast is not a form of security alone.
Name (SSID): Enter the SSID name of the router.
Channel: Use the dropdown menu to select the wireless channel. Auto is the
default recommended setting.
Mode:
Use the dropdown menu to specify the wireless mode.
Channel Width:
Use the dropdown menu to select the channel bandwidth.If you
selected the 802.11n, 802.11 b/g, or 802.11 b/g/n wireless modes, the
available options are 20 MHz and 20/40 MHz. For the other modes,
20 MHz is the only option.
Disable Security:
Disabling encryption and leaving your wireless network open is
not recommended. Any wireless client will be able to access your
network, be able to use your Internet connection, and leaves you
open to security threats.
WPA-PSK/WPA-
Using WPA-PSK encryption is highly recommended to protect your
PSK AES:
wireless network traffic.
Key: Enter a wireless key to use on your wireless network.
Next: Proceed to the next step.
Back: Go back to the last step.
D-Link DIR-608 User Manual
Wizard (continued)
Wireless Network
Easy Setup - Wireless
You can configure the wireless parameters and security
settings of router on this step.
☐
Disable the wireless radio.
SSID: D-Link_DIR-608
Channel: Auto
Mode: 2.4 GHz (B+G+N)
Channel Width: Auto 20/40 MHz
Wireless Security
It is recommended strongly that you choose one of following
options to enable security, and select WPA-PSK/WPA2-PSK
AES encryption.
Disable Security
WPA-PSK/WPA-PSK AES
Key: (8-63 characters or 64 hex digits)
▼
▼
▼
Back Next
22