Section 3 - Configuration
Select IPv6 In IPv4 Tunnel if you wish to configure the IPv6
My IPv6
Connection is:
connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunnelling
encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can
be sent over an IPv4 infrastructure.
IPv6 in IPv4 Tunnel Settings
Remote IPv4
Enter the IPv4 remote address you will use.
Address:
Remote IPv6
Enter the IPv6 remote address you will use.
Address:
Local IPv4
Displays the current local IPv4 address.
Address:
Local IPv6 Address
Enter the IPv6 local address and subnet prefix length.
and Subnet Prefix
Length:
Select either Obtain DNS server address automatically or Use the following DNS address.
If you choose Use the following DNS address, please configure the following field:
Primary DNS
Enter the primary DNS server address.
Address:
Secondary DNS
Enter the secondary DNS server address.
Address:
D-Link DIR-608 User Manual
IPv6 In IPv4 Tunnel
IPv6 Connection Type
IPv6 DNS Settings
IPv6 Connection Type:
Choose the mode to be used by the router to the IPv6
Internet.
My IPv6 Connection is:
IPv6 In IPv4 Tunnel
IPv6 in IPv4 Tunnel Settings
Enter the IPv6 in IPv4 Tunnel information provided by
your Tunnel Broker.
Remote IPv4 Address:
Remote IPv6 Address:
Local IPv4 Address: 192.168.x.x
Local IPv6 Address:
IPv6 DNS Settings
Obtain DNS server address automatically or enter a
specific DNS server address.
Primary DNS Address:
Secondary DNS Address:
▼
/
40