Philips 330 Service Manual page 26

Depart. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
8.4.5 W@P Error messages
Error messages may be displayed on the mobile phone screen. Some of these are listed next:
Network not responding:
Login and/or password are wrong.
Server not responding:
Internet server is not enabled:
Not acceptable:
An internal gateway error prevents the gateway from fulfilling your request:
PROCEED http://phone.com
Error content exit size XXXX bytes:
Try later:
Bitmap error:
Note: The phone can not be switched off with ON/OFF key when W@P application is used. It has not to be considered as a
bug.
 PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
This error message is displayed for various problems, such as:
Network cannot be reached (not enough reception bars).
Subscription does not allow W@P access
Could be due to:
Could be due to:
Could be due to:
Could be due to:
Could be due to:
Could be due to:
Could be due to:
Could be due to:
Service Repair Support
Bad IP address (gateway parameter).
Bad IP address (gateway parameter).
Bad home page address (URL)
Bad home page address (URL)
Bad home page address (URL)
Too much data are coming to the phone.
Operator dependent.
Network cannot be reached (not enough
reception bars).
Busy network.
The content is not W@P; the image can not
be displayed.
COMPANY RESTRICTED
VY-V-640-P330
Page : 26 of 43
Langue : EN
Date : 11/06/03
VY-V-640-P330