Samson 3374 Mounting And Operating Instructions page 59

Using the command pen
1. Open the actuator cover.
2. Insert the command pen into the serial interface of the actuator.
Ö The actuator automatically recognizes the command pen. The dialog for the command
pen appears on the display. The function (command) selected in TROVIS-VIEW is repre-
sented by a code on the display (see Table 6).
3. Remove command pen after the command has been executed.
Ö The command pen dialog ends. The start screen appears.
Close the actuator cover.
Table 6: Command pen dialog
Code Command/function
S21 Retract actuator stem
S22 Extend actuator stem
EB 8331-4 EN
Memory pen
Text
IN
OUT
59