Using Common Flexible Boards And Dedicated Flexible Boards Differently As Specified - Sony VAIO PCG-F610 Service Manual

1-6. Using Common Flexible Boards and Dedicated Flexible
Boards Differently As Specified
When maintaining the VAIO Note F series computer, use the common flexible board and dedicated flexible board differently
depending on the type of LCD as follows.
When using the common flexible board for maintenance, the flexible board ID portion of the common board
must be cut locally using a cutting knife in order to register the ID No. that is unique to each model. Refer to the
following model table and cutting procedure before starting cutting.
For all models except the following, the dedicated flexible board must be used, in which case the flexible board
ID portion does not need to be cut.
1 To maintain models indicated by a white round
mark "a" in the following table, use the common
board after cutting the flexible board ID portion.
Name
Model
of LCD
F610
F630
a : Cut
×
: Do not cut
Confidential
PCG-F610/F630 (UC)
ID
5 4 3 2 1
× ×
SA a a a a
× × ×
SA a a a
P5
P4 P3 P2 P1
— Example of cutting the flexible board
ID portion of the common board —
(F630 Model (Made by SA))
0
2 Attach the GND Tape (LCD) while aligning its
corner with that of the flexible board.
GND Tape (LCD)
P0
1-12
About 1mm