10. LCD Section (F610 Model) – Made by SA –
1. Bezel Housing Assy
2M2X4 Special Head
1Lower Screw Cover
2M2X4
Special
Head
C
4M2X4
Special
Head (X4)
5+PS 2.6X5
Adhesive tape
(Filament tape)
Inverter Assy
Inverter Assy
CN2
Lamp Harness (White)
• When Lamp Harness is installed, fix the Lamp Harness (white) using the adhesive tape (Filament tape) on the
Display Housing Assy as shown. Route the Lamp Harness (pink) through the Insulator (Harness INV) as shown.
• Attach the adhesive tape (Filament tape) as shown to prevent the Lamp Harness (pink) from going under the
Bracket LCD Right.
• Be careful not to cover the screw hole with adhesive tape (Filament tape).
Confidential
PCG-F610/F630 (UC)
1Upper Screw Cover
Bezel Housing Assy
B
3
1Lower Screw
2M2X4 Special Head
LCD Unit
8
5+PS 2.6X5
7
Adhesive tape
(Filament tape)
: claw part
A
Cover
B
4M2X4
Special
Head (X4)
6
Order of releasing the claws C → B → A
Order of locking the claws
Display Housing Assy
Lamp Harness (Pink)
Lamp Harness (Pink)
1-8
1Upper Screw Cover
2M2X4 Special Head
How to release the claw A.
Bezel Housing Assy
Display Housing Assy
Pull the Bezel Housing Assy
as shown to release the claw A.
A → B → C
Insurator (Harness INV)
Filament tape
Bracket LCD Right
A