Replacing Various Connectors On The Mbx-39 Board; Removing The I/O Bracket; Removing The Various Connectors - Sony VAIO PCG-F610 Service Manual

1-5. Replacing Various Connectors on the MBX-39 Board

Replace the connectors of "5-4. Connector Section" as follows.

1. Removing the I/O Bracket

When removing the connectors of reference numbers 901, 903, 904, 905, 906, 908 and 909 (refer to page 5-9), remove the
I/O bracket first.
MBX-39 Board

2. Removing the Various Connectors

Remove the PC card connector by removing the screws as follows.
Because the other connectors (Refer to page 5-9, 5-10) are connected by soldering, remove the soldering first then remove
the connectors.
M2X5 (X2)
+B 2X18 (X2)
PC Card Connector
+B 2X14 (X2)
I/O Bracket
MBX-39 Board
1-11
Screws (HEX) (X6)
Confidential
PCG-F610/F630 (UC)