Projector Reset Options - Reset Menu - Epson PowerLite 675W User Manual

Event ID code
0479
04FF
0891
0892
0893
0894
0898
0899
Parent topic:

Projector Reset Options - Reset Menu

You can reset most of the projector settings to their default values using the Reset All Config option on
the Reset menu.
Cause and solution
A projector system error has occurred. Turn the projector off and then on again.
Cannot find the SSID (network name). Make sure your computer and projector are
connected to your access point's current SSID.
The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
The TKIP/AES encryption type does not match. Make sure the wireless network
security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the DHCP setting in the Network menus.
A communication error has occurred. Try restarting the network software and
restarting your projector. If that does not solve the problem, contact Epson for help.
Projector Information Display - Info Menu
157