Projection Distance; Removing And Attaching The Cable Cover - Epson PowerLite 675W User Manual

Rear projection from a table or portable cart behind a translucent screen
Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an
angle.
If you project from a table or portable cart, or from the rear, be sure to select the correct Projection
option in the projector's menu system.
Parent topic:
Related references
Projector Setup Settings - Extended Menu

Projection Distance

The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Refer to the tables in the Installation Guide included with your mount to determine approximately how far
to place the projector from the screen based on the size of the projected image. (Conversion figures may
have been rounded up or down.) You can also use the Projection Distance Calculator
(Canada), or
Parent topic:

Removing and Attaching the Cable Cover

Before you can connect equipment to your projector, you need to remove the cable cover.
Projector Placement
here (Caribbean) .
Projector Placement
30
here (U.S.), here