Table of Contents
Advertisement
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Remove the air baffle
5.
CAUTION: The fan does not have a fan guard. Special attention is needed when removing or
installing the fan to prevent finger injury.
Disconnect the fan cable.
6.
Remove the fan.
7.
To replace the component, reverse the removal procedure.
DIMMs
Memory-processor compatibility information
•
Intel Xeon E5-2600 v3 processors are optimized for:
Single-rank and dual-rank PC4-2133 (DDR4-2133) RDIMMs operating at up to 2133 MT/s
o
Dual-rank and quad-rank PC4-2133 (DDR4-2133) LRDIMMs operating at up to 2133 MT/s
o
•
Intel Xeon E5-2600 v4 processors are optimized for:
Single-rank and dual-rank PC4-2400T (DDR4-2400) RDIMMs operating at up to 2400 MT/s
o
Dual-rank PC4-2400T (DDR4-2400) LRDIMMs operating at up to 2400 MT/s
o
For the latest memory configuration information, see the product QuickSpecs on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/qs).
Removing the DIMM
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
("Access
panel" on page 35).
("Air
baffle" on page 36).
Removal and replacement procedures 46
Advertisement
Table of Contents
