Rheem HB Duct Ready Series Use & Care Manual page 19

Basic Water Heater Operation
settings
Temperature Display
Screen Adjustment Lock?
Beep On Alarm
EcoNet Network Instance
High Temp Adjust Enable
Elec. Heat Override Time
settings
Temperature Display
Screen Adjustment Lock?
Beep On Alarm
EcoNet Network Instance
High Temp Adjust Enable
Elec. Heat Override Time
settings
Temperature Display
Screen Adjustment Lock?
Beep On Alarm
EcoNet Network Instance
High Temp Adjust Enable
Elec. Heat Override Time
settings
Temperature Display
Screen Adjustment Lock?
Beep On Alarm
EcoNet Network Instance
High Temp Adjust Enable
Elec. Heat Override Time
Beep on Alarm: The audible Alarm tone can
be disabled during service periods.
Fahrenheit
No
To Enabled/Disabled the audible alarm, press
Enabled
"Enabled" to highlight, then press up/down
1
buttons to change to Enabled/Disabled.
No
3 days
EcoNet Network Instance: This number can
be set between 1 and 32. Instance is the way
Fahrenheit
an EcoNet network identifies each appliance
No
of the same model on the network.
Enabled
1
To change the instance number, press "1" to
No
highlight, then change the number pressing
3 days
the up/down buttons.
High Temperature Enable: This setting
can be set to "Yes" if a tank temperature
Fahrenheit
higher than 140°F is desired. This setting will
No
automatically turn "No" after 10 minutes of
Enabled
inactivity on the user interface.
1
To enable or disable temperature adjust, press
No
"No" to highlight, then press up/down buttons
3 days
to change to Yes/No.
Elec. Heat Override Time: This setting can
be set from 1 to 7 days and will return the unit
Fahrenheit
to the previous (more efficient) mode after the
No
set number of day is complete.
Enabled
To set the days, press "3 days" to highlight,
1
then press up/down buttons to adjust the days.
No
3 days
19