Advertisement
3.2.1 Mounting the backrest actuator
C
1. Place the upper part of the backrest actuator A in the
attachment B on the frame.
2. Attach the backrest actuator with the safety pin or safety
shackle C in the lower hole of the attachment.
Dahlia 30 has a safety pin and Dahlia 45 has a
safety shackle.
3. Place the lower part of the backrest actuator A in the
lower attachment G on the frame.
4. Attach the lower part with the pin E, sleeve D and the
locking washer F.
Nippers
Locking the safety pin
Safety pin Dahlia 30
Safety shackle Dahlia 45
1587500-A
Dahlia 30
B
G
E
F
A
D
Dahlia 45
D
G
F
E
A
A
B
3.2.2 Mounting the seat tilt actuator
Seat tilt actuator — Dahlia 30
1. Place the upper part of the seat tilt actuator A in the
attachment B on the frame.
2. Attach the seat tilt actuator with the screw C, the
sleeves D and E and the nut F.
3. Place the lower part of the seat tilt actuator in the front
attachment J on the frame.
4. Attach the seat tilt actuator with the screw I, the
sleeves G and H and the nut K.
5. Tighten the screws with 24 Nm.
6 mm Allen key / 13 mm fixed spanner
Seat tilt actuator — Dahlia 45
1. Place the upper part of the seat tilt actuator A in the
attachment B on the frame.
2. Attach the seat tilt actuator with the pin C, the sleeve
D and the locking washer E.
3. Place the lower part of the seat tilt actuator in the lower
attachment F on the frame.
4. Attach the seat tilt actuator with the pin H, the sleeve
G and the locking washer I.
Nippers
B
E
C
D
A
K
D
E
C
B
G
H
A
F
I
3
Advertisement
