Scanning Problems
Image is dark, with little or no detail.
Calibrate the screen as described in "Calibrating Your Screen" on
page 4-2.
You cannot scan an image or you only get a few
dots for the scanned image.
❏ Make sure a document is placed on the document table of the
scanner.
❏ Change the Threshold setting in the Image Control dialog box.
See "Image Controls" on page 3-9.
Moiré (cross-hatch) patterns appear in the
scanned image
❏ Make sure Image Type is set to Color Document or Black &
White Document in the Manual mode window.
❏ Place a transparent sheet such as an overhead projector sheet
between the document and the document table.
❏ Reposition the document slightly.
❏ Make the image size slightly smaller.
Colors differ from the original.
❏ Calibrate the screen. See "Calibrating Your Screen" on page
4-2.
Maintenance and Troubleshooting
5-17