System Requirements - Escort iMiniPlus User Manual

The iMiniPlus comes with water-proof covers for the RS232 connection and the battery.
Make sure that when logger is in use these covers are in place. This is important in wet or dusty environments. If covers are
lost please contact your distributor for a replacement.
3. Installing the Software & USB driver
To operate your iMiniPlus logger you will need to first install the software on your computer. This will allow you to prepare
your iMiniPlus for use, retrieve the readings the iMiniPlus has recorded, and analyse the data. This chapter will take you
through the steps necessary to successful install the software on to your computer so you can begin using your iMiniPlus.

System requirements

To ensure that the software will be able work with your computer, the following lists the minimum specifications required:
Minimum requirements:
Pentium II 233MHz processor
64MB RAM
15MB free disk space
Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP
Internet Explorer 5.0 or later
1 available USB port
800 x 600 screen resolution
256 screen colours.
The recommended specifications are:
Windows 2000, Windows XP, Windows Vista, Windows 7, 8, 8.1 or Windows 10
Internet Explorer 6.0 or later
65535 (16bit), or more, screen colours.
1024 x 768, or higher, screen resolution.
iMiniPlus Profile
RS232 connection
Identification sticker
with barcode
Battery cover
7