Page 1
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 Escort iMiniPlus PDF Data Logger Quick User Guide Product code: MU-IN-D-8-L MU-OE-D-8-L MU-ST-D-8-L MU-IN-D-16-L MU-OE-D-16-L Escort Verification Technologies, Inc. dba ESCORT Data Loggers PO Box 309, 120 Parkway Drive...
10.5.6 Enable stop button in this logger(s) .......... 19 Viewing logger data with PDF Reader Software .......... 20 Downloading logger readings via Escort Console Pro ........20 12.1 Download wizard ................21 Does Console work with PDF file? ............. 22 Escort Verification Technologies, Inc.
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 1 S p e c i f i c a t i o n s iMiniPlus PDF 8K iMiniPlus PDF 16K Operating Temperature -40°C to +70°C ( -40°F to +158°F) -40°C to +70°C ( -40°F to +158°F)
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 Front view Display & buttons Rear view USB connector, Product label and battery Escort Verification Technologies, Inc. dba ESCORT Data Loggers PO Box 309, 120 Parkway Drive...
Battery Low icon on LCD. Escort Console checks battery status of the logger when programming the logger for new trip. Please note that battery low detect circuit is only accurate when electronics and battery of the is at room temperatures from 15 °C to 25 °C or from 59 °F to 77 °F. If logger is used in cold environment it may report battery low prematurely on LCD display.
Page 7
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 2. Through the escort website www.escortdataloggers.com See instruction below for Website Installation Escort Verification Technologies, Inc. dba ESCORT Data Loggers PO Box 309, 120 Parkway Drive...
4. Once you have downloaded and installed the Escort Console Pro Software 5. Install Escort Console pro software on your workstation For a more in-depth guide to Escort Console Installation, please refer to the user manual provided www.escortdataloggers.com on the website: http://escortdataloggers.com/manuals/Software/Escort_Console_User_Manual_Engl...
PDF report contents Open (double click) RECORD.PDF You can disable PDF report generation by programming logger with Escort Console software. You can also enable or disable certain parts of the report as described by the document named “iMiniPlus PDF Logger User guide - working with Console”.
Page 10
8048 readings. Logger computes average that includes all readings even the ones already overwritten. Escort Console computes average based on readings retrieved from logger memory and result may be different.
Page 11
±0.1°F due to the complexity of conversion between Fahrenheit and Celsius. The same report produced by Escort Console may differ from PDF report produced by the logger in term of temperature by ±0.1°F. Duration of out of specification and the list of readings will read the same.
Escort iMiniPlus PDF Logger Quick User Guide v1.1 Programming logger with Escort Console You have to use Escort Console Professional version 2.10.03 or later to program the logger. (For 16K logger MU-IN-D-16-L Version 2.12.07 or above) Check this check box and click on “Program and Configure”...
Make sure that you keep a note of your password and logger serial number in a safe place. If you lose or forget the password, the logger will have to be returned to your nearest distributor or Escort Data Logging Systems to restore default password.
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 10.3 Configure Sensors and Alarm Settings Sensors Tab – this displays the sensor information some of which can be changed by using Configure Sensor(s) and others that remain fixed i.e. range - 40°C to 70°C.
Page 15
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 triggered. If the readings fluctuate outside upper and lower threshold temperatures, the same rule applies (providing the appropriate “raise alarm” box is ticked). Once the reading(s) return inside alarm limits, the consecutive alarm is reset.
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 The table below demonstrates arbitrary data from an iMiniPlus PDF Logger and how different alarm sources will be triggered. This is complicated scenario for alarm settings based on: ...
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 Date/Time Tab - Check that the date and time is correct. If you have removed batteries from the iMiniPlus PDF Logger for any length of time make sure you either select: ...
Start new log trip The only way to start an iMiniPlus PDF Logger is by using the START button. With other Escort products it is possible to have a timed or date start as well as a switch start. You can also program a delay into the starting process of up to 4 hours 15 minutes.
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 10.5.5 Continuous logging If you are intending to place the iMiniPlus PDF in an environment that you want to record temperatures 24/7 (for example, laboratory refrigerator), you can select the iMiniPlus PDF Logger to log continuously.
Issue Date: 23 May 2011 Version 1.1 Escort iMiniPlus PDF Logger Quick User Guide v1.1 Viewing logger data with PDF Reader Software You can download data from the logger by connecting the logger to a USB port. Once the logger hardware is installed and logger can be recognized by Operating System as Mass Storage Device you can open RECORD.PDF file.
Please note that this feature may other Escort products from time to time. Additionally some Help documentation may not be present due to the software version you are currently using. Consult...
Does Console work with PDF file? Escort Console neither opens logger PDF report nor creates one. Escort Console only works with LRF and LCF files. In order to ensure that the PDF file has not been tampered with you need to visually compare it with Console view of the LRF file.