Category Selection - Panasonic CQ-C800U System Upgrade Manualbook

Sirius Satellite Radio Receiver
1
Press [SOURCE] to select the Sirius
Satellite Radio mode.
2
Press [BAND] to select a band.
Notes:
¡ "– – – –" is displayed when there is no informa-
tion.
"UPDATING" is displayed when channel informa-
¡
tion is updated.
3
Select a channel.
Channel selection
[]] (TUNE): Preceding channel
[[] (TUNE): Next channel
Note: When you select a locked channel, hold down
[#] on the remote control for 2 sec. or more. PASS-
CODE entering display will appear.
Up to 6 channels can be preset in SR1 to SR3
respectively.
Preset channels can be simply called up by pressing
[}] (P-SET) or [{] (P-SET).
Note: Direct selection can be executed with [1] to [6]
buttons on remote control.
1
Tune into a channel.
2
Hold down
3
Turn [VOL] to select a preset number.
4
Hold down [PUSH SEL] for 2 sec. or
more, and the channel is written on the
selected preset number.
You can toggle the category on and off every time you
hold down [BAND] for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Channel selection
[]] (TUNE): Preceding channel in current category
[[] (TUNE): Next channel in current category

Category selection

[{] (P-SET: Preset): Preceding category
[}] (P-SET: Preset): Next category
18
CQ-C800U
or for 2 sec. or more.
[}] [{]
SOURCE PWR
SQ
MENU
DIM
TUNE
TRACK
FOLDER /P-SET/DISC
MUTE
・
D M
SBC-SW
LIST
Preset channel selection
[{] (P-SET: Preset): Lower preset channel
[}] (P-SET: Preset): Higher preset channel
Notes:
¡ Direct selection can be executed with [1] to [6]
buttons on remote control.
A preset station is selectable by turning [VOL]
¡
and pressing [PUSH SEL] while the preset list
screen is present on the monitor.
The volume is not adjustable while the preset list
¡
screen is present on the monitor.
Preset number/channel number blinks once.
Notes:
In step 2, a channel can be registered by holding
¡
down the numeric button [1] to [6] on remote control
for 2 sec. or more.
¡ To stop presetting channels, press [DISP:
DISPLAY].
¡ The operation above allows users to replace the cur-
rent channel with the channel preset in the selected
number while selecting a preset channel.
SOURCE PWR
SQ
MENU
DIM
TUNE
TRACK
FOLDER /P-SET/DISC
MUTE
・
D M
SBC-SW
LIST
lights when activated.
CQ-C800U
/ /SET/ APM TILT
BAND DISP OPEN
CQ-C800U
/ /SET/ APM TILT
BAND DISP OPEN