Sirius Control; Sirius Mode; Channel Selection - Panasonic Sirius CQ-DFX883U Operating Manual

Sirius Control

E
N
G
L
I
S
H
Preparation:
≥ Connect the Sirius receiver (CR-SRT100, op-
1
tion).
≥ Set the Sirius setting to SET ON.
≥ Sirius satellite radio is available on a chargeable
basis.
≥ The CA-CD55, available separately as an option-
al accessory, is required to connect the CD
changer and the Sirius receiver for your listen-
ing enjoyment at the same time.

Sirius Mode

1
(When a Sirius receiver is connected and
Sirius setting is SET ON.)
Press [SOURCE] to change to the Sirius
mode.
What is displayed here changes in line
with the reception sensitivity.
Band
2
Press [BAND].

Channel Selection

3
[$]: Up
[%]: Down
Press and hold [%] or [$] for more than
0.5 seconds to change channels rapidly.
8
Note:
≥ The receivable area of Sirius broadcasting is lim-
ited.
≥ Refer to the operating instructions for Sirius re-
ceiver for details.
≥ If the Sirius receiver and CD changer have been
connected, operation will not be switched to the
CD changer mode using [BAND]. Instead, press
[SOURCE] to switch to this mode.
Sirius control mode display
Band Channel number
Lights when Sirius setting is
Preset number
SET ON.
["] [#] (category)
[DISP] (display)
Caution:
≥ To ensure safety, never attempt to preset stations while you are driving.
≥ Do not watch the scroll display while driving a car.
Category Selection
Press ["] or [#].
The first channel in a selected category is received.
The category name is displayed after the channel
number.
Channel number
Category name
Note:
≥ When the category is changed, ON will be set au-
tomatically for the category priority setting.
(page 10)
Manual Preset Memory
Up to 6 stations each can be saved in the SR1, SR2
and SR3 preset station memories.
1 Select a band and channel. (previous page)
2
Press and hold [1] to [6] for more than 2 sec-
onds to memorize.
Preset number
Note:
≥ Existing saved stations are overwritten with new
stations after this procedure above.
Preset Station Calling
1
Select a band. (previous page)
2
Press [1] to [6].
Display Change
Press [DISP] (display).
Channel number (default)
Channel name
*Artist name (scroll)
*Song title (scroll)
Clock display
Note:
Displays when there is no text.
*Press and hold [DISP] (display) for more than
2 seconds to have an another circle scroll while a
text is displayed.
Direct Channel Selection
Example: channel number 10
1 [ ]
Press # .
2
Press [1] [0].
3
Press [BAND].
Note:
≥ Press [DISP] (display) to return to the regular
mode.
POWER MENU
[SOURCE]
SOURCE SEL
NUMBER VOL
[ ] (number) #
#
MUTE
[0] to [9]
1 2 3
RAND SCAN REP (channel number)
4 5 6
[1] to [6]
[%] [$]
7 8 9 (preset station)
(channel)
6 5
[DISP] (display)
[BAND]
0
BAND DISP
SET
(set)
["] [#]
Car Audio
(category)
E
N
G
L
I
S
H
2
9