Panasonic CQ-C800U System Upgrade Manualbook page 10

Disc Changer
Connected an optional DVD changer (CX-DH801U) can be controlled by this unit.
1
Load a magazine (discs).
When a magazine is already loaded, press
[SOURCE] to select the DVD changer mode.
The unit recognizes the magazine and starts playing
automatically.
Notes:
¡ For DVD operations other than the above (i.e. DVD
menu, closed caption, etc.), use the remote con-
trol unit supplied with the DVD changer.
¡ The remote control unit supplied with the DVD
changer does not work properly when you aim it
at this unit.
¡ When using the remote control unit supplied with
the DVD changer, aim it at the monitor display
(CY-V7100U).
Chapter number
Disc number
Changer indicator
10
CQ-C800U
(when DVDs or VCDs are loaded)
Disc type
SOURCE PWR
SQ
MENU
DIM
TUNE
TRACK
FOLDER /P-SET/DISC
MUTE
・
D M
SBC-SW
LIST
2
Select a desired portion.
Disc selection
[}] (DISC): Next disc
[{] (DISC): Preceding disc
Chapter/Track selection
[7]: Next chapter/Next track
[6]: Preceding chapter/ Preceding track
(press twice)
Note: Hold down for fast forward/reverse.
Pause
Press [BAND] (y / 5).
Press again to cancel.
Play Mode indicators
lights when each mode is
activated.
(Disc Repeat)
(Chapter Repeat)
(Title Repeat)
CQ-C800U
/SET/ APM TILT
/
BAND DISP OPEN
Time
lights when the changer is
connected.