Whirlpool MW8650XS Use And Care Manual page 11

Using AUTO SET
Auto Set TIME and TEMP are preset cooking cycles which store commonly used cooking
times and probe temperature settings.
Auto Set TIME
Auto Set TIME provides ten preset times. One to nine at HIGH Cook Power can be set by
touching TIME and the corresponding Number Pad 1-9. This provides a short-cut method
for setting commonly used cooking times.
The Auto Set Chart included with your microwave oven and the Auto Set Guide on the
inner door panel help you use the TIME Pad to cook various food items without having to
look up the cooking time.
A preset time of 2 minutes, 30 seconds at HIGH Cook Power is available by touching just
the TIME Pad. The time may be changed to any time from O-99 minutes, O-99 seconds
allowing you to store your favorite cooking time and Cook Power. See page
12 for
instructions.
DO THIS...
1.
Put food in the oven and
close the door.
2.
Touch TIME.
(Option: Skip to Step 6 if
you want to use the pre-
set cooking time and
Cook Power.)
3. Touch a Number Pad for
the new cooking time you
want from 1 to 9 minutes.
4.
Touch COOK POWER.
(Option: Skip to Step 6 if
you want to cook at HIGH
power.)
THIS HAPPENS...
The AUTO SET Indicator Light will
come on and the Display will show
2 minutes, 30 seconds (or the
time you have set as your favorite
cycle).
The Display WIII show what you
touched in even mrnutes This
example shows 4 minutes
The COOK POWER Indicator Light will
come on and the Display will show
"P-HI:' This shows the oven is pre-
programmed to cook at full (HIGH)
power.
continued on next page