Whirlpool MW8650XS Use And Care Manual page 10

m . . . .
4.
Touch COOK POWER.
5. Touch a Number Pad for the
Cook Power you want.
6. Touch START.
d
Count
OWtl
The COOK POWER Indicator Light
will come on and the Display will
show "P-HI!' This shows the oven is
preprogrammed to cook at full
(HIGH] power.
The Display will show what you
touched. This example shows you
touched Number Pad 5 for 50%
of full power.
The COOK and COOK POWER Indicator
Lights will stay on to show that the oven
is cooking at a Cook Power other than
HIGH.
The Display counts down the time to
show how much cooking time is left in
the first cycle
When the cooking time ends, "End"
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) "End" will remain on the
Display and a reminder tone will
sound every 60 seconds until the door
is opened or CANCEL is touched.
The Display will then show the time of
day.
Changing the Cook Power
The Cook Power can be changed any time before touching START or during the cycle.
l
Touch COOK POWER
l
Touch a number for the new Cook Power.
l
Touch START The cycle WIII cook at the new Cook Power for the orlgrnal time
OR...
l
Touch COOK POWER twice If you want to change a lower Cook Power to HIGH
. Touch START
10