Lexus LS600hL Owner's Manual page 338

338
4-5. Using the driving support systems
CAUTION
Handling the radar sensor
■
One Blind Spot Monitor sensor is installed inside the left and right side of the vehi-
cle rear bumper respectively. Observe the following to ensure the Blind Spot
Monitor can function correctly.
Keep the sensor and its surrounding area
●
on the bumper clean at all times.
Do not subject the sensor or surrounding area on the bumper to a strong impact.
●
If the sensor moves even slightly off position, the system may malfunction and
vehicles that enter the detection area may not be detected. If the sensor or sur-
rounding area is subject to a strong impact, always have the area inspected by
your Lexus dealer.
Do not disassemble the sensor.
●
Do not attach accessories or stickers to the sensor or surrounding area on the
●
bumper.
Do not modify the sensor or surrounding area on the bumper.
●
Do not paint the sensor or surrounding area on the bumper.
●
LS600hL_U(OM50D26U)