Lexus LS600hL Owner's Manual page 162

162
3-3. Adjusting the seats
Seat cushion automatic length adjustment (driver's seat)
■
If the front of the cushion gets too close to the area around the instrument panel
when the seat position is being adjusted, the seat cushion will automatically retract.
Seat operation automatic stop function (vehicles with relaxation seat)
■
If a front seat is likely to come into contact with the retractable table (4-seat models)
or the ottoman during seat operation or activation of the auto away function, a
buzzer will sound and seat slide operation will be stopped partway.
(A warning message will be shown on the multi-information display.)
CAUTION
When adjusting the seat position
■
Take care when adjusting the seat position to ensure that other passengers are
●
not injured by the moving seat.
Do not put your hands under the seat or near the moving parts to avoid injury.
●
Fingers or hands may become jammed in the seat mechanism.
Seat adjustment
■
To reduce the risk of sliding under the lap belt during a collision, do not recline the
seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply restraint
forces directly to the abdomen, or your neck may contact the shoulder belt,
increasing the risk of death or serious injury in the event of an accident.
Adjustments should not be made while driving as the seat may unexpectedly move
and cause the driver to lose control of the vehicle.
Operating the front passenger's seat from the driver's seat or rear seat
■
Do not operate the front passenger's seat when a passenger is seated in it. In addi-
tion, do not let anyone sit down in the front passenger's seat while the seat is being
operated or when the head restraint is being folded. The front passenger may
catch their legs between the instrument panel and seat, or the head restraint may
interfere with their head, resulting in injury.
When adjusting the seat positions
■
Make sure to leave enough space around the feet so they do not get stuck.
LS600hL_U(OM50D26U)