180
3-3. Adjusting the seats
Using the door lock switch
Carry only one of the keys (including the card key) to which you want to
link the driving position. If 2 or more keys are in the vehicle, the driving
position cannot be linked properly.
Turn the power switch off and close the driver's door.
1
While pressing the desired
2
button ("1", "2" or "3"), press
the lock or unlock side on the
door lock switch (either the
driver or passenger side) until
the signal beeps.
Recall procedure
■
Carry the electronic key that has the driving position registered to it
1
and unlock the doors using the smart access system with push-but-
ton start or the wireless remote control.
The registered driving position will be recalled to the auto away position.
Turn the power switch to ACCESSORY mode or fasten your seat-
2
belt.
The auto return function will activate and the registered driving position will be
recalled.
Cancelation procedure
■
Turn the power switch off and close the driver's door.
1
Using the wireless remote control:
2
While pressing the "SET" button, press
control until the signal beeps.
Using the door lock switch:
While pressing the "SET" button, press the lock or unlock side on the
door lock switch until the signal beeps.
LS600hL_U(OM50D26U)
on the wireless remote