Lexus LS600hL Owner's Manual page 244

244
4-3. Operating the lights and wipers
The Automatic High Beam can be operated when
■
The power switch is in ON mode.
Camera sensor detection information
■
High beam may not be automatically turned off in the following situations:
●
• When oncoming vehicles suddenly appear from a curve
• When the vehicle is cut in front of by another
• When oncoming or preceding vehicles are hidden from sight due to repeated
curves, road dividers or roadside trees
High beam may be turned off if an oncoming vehicle that is using fog lights without
●
using the headlights is detected.
House lights, street lights, red traffic signals, and illuminated billboards or signs may
●
cause the high beam to turn off.
The following factors may affect the amount of time taken to turn high beam on or
●
off:
• The brightness of headlights, fog lights, and tail lights of oncoming and preced-
ing vehicles
• The movement and direction of oncoming and preceding vehicles
• When a oncoming or preceding vehicle only has operational lights on one side
• When a oncoming or preceding vehicle is a two-wheeled vehicle
• The condition of the road (gradient, curve, condition of the road surface etc.)
• The number of passengers and amount of luggage
High beam may be turned on or off when unexpected by the driver.
●
Small vehicles, such as bicycles, may not be detected.
●
LS600hL_U(OM50D26U)