Power Supply - HP EliteOne 800 G3 Maintenance & Service Manual

Power supply

Description
Power supply, 180 W, for use in Intel models with UMA graphics
Power supply, 210 W, for use in AMD models with discrete AMD graphics
The power supply is located in the upper left side of the computer.
To remove the power supply:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the VESA mounting bracket/fan assembly (see
on page
6. Remove the three Torx screws (1) that secure the power supply to the computer.
7. Disconnect the power supply cable from the system board connector (2).
8. Lift the power connector from its housing in the I/O bracket (3).
9. Remove the power cable from the clips built into the computer (4).
Removing the rear port cover on page
Stands on page
Access panel on page
43).
Preparing to disassemble the computer on page
20).
21).
VESA mounting bracket/fan assembly
19).
19).
Power supply 45