C Getting Started - Remington HC4250 Instructions Manual

ENGLISH

C GETTING STARTED

, CHARGING YOUR APPLIANCE
, Note: It is recommended to fully charge your appliance before using for the
first time. Please refer to the charge times shown in this book.
• Connect the product to the adaptor and then to the mains.
• When charging the charge indicator will slowly flash.
, CHARGE LEVEL INDICATORS
Charge Level
Charging
Fully charged
• Run time from fully charged is up to 40 minutes.
• Charge time from empty is 4 hours.
, Note: To preserve the life of your batteries, let them run out every 6 months
then fully charge.
, QUICK CHARGE FUNCTION
• 10 minutes charging will give an emergency burst of run time.
F INSTRUCTIONS FOR USE
• For corded use connect the product to the adaptor, then to the mains.
, CAUTION
• Extended mains only use will result in the reduction of the battery life.
, CORDLESS USE
• When the unit is switched on and fully charged, the product can be used in
cordless mode for up to 40 minutes.
• Switch the product on by pressing the on/off switch.
, BEFORE STARTING THE CUT
• Inspect the clipper making sure that it is free from hair and dirt.
• Before cutting, always comb the hair so it is tangle free and dry.
4
Indicator
LED blinks
LED solid