Honda TRX680FA2011 Owner's Manual page 199

If You Have a Flat Tire
Installation
1. Position the wheel.
2. Position the wheel nuts so that the tapered sides face the wheel
rim ( ). 2
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV to the
ground before tightening the nuts in a crisscross (rather than circular)
pattern to the specified torque:
47 lbf·ft (64 N·m , 6.5 kgf·m)
If a torque wrench was not used for installation, see your Honda dealer
as soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
192
Taking Care of the Unexpected