Honda TRX680FA2011 Owner's Manual page 130

1. Park the ATV on level ground.
2. Place an oil drain pan under the oil drain plug ( ).
3. Remove the oil fill cap ( ) and the drain plug.
4. After the oil has completely drained, reinstall the drain plug and
tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5. Fill the gear case with the recommended oil.
2.7 US oz (80 cm )
6. Make sure the oil level is at the lower edge of the inspection hole ( ).
7. Install the oil fill cap.
REAR
2
(3)
(2)
(1) oil drain plug
(2) oil fill cap
(3) lower edge of the inspection hole
Gear Case Oil
1
(1)
Servicing Your Honda
3
123