Honda TRX680FA2011 Owner's Manual page 127

Engine Oil & Filter
Install a New Engine Oil Filter:
3. Remove the oil filter bolt ( ) and oil filter cover ( ).
Let the remaining oil drain out.
4. Remove the oil filter ( ) from the cover.
5. Remove the spring and washer. Do not discard the washer with the
old oil filter.
6. Discard the oil filter.
7. Check the O-rings ( ) are in good condition and then insert a new oil
filter to the oil filter cover.
Use only the Honda Genuine oil filter or a filter of equivalent quality
specified for your model. Using the wrong Honda filter or a non-
Honda filter which is not of equivalent quality may cause engine
damage.
8. Install the oil filter cover and tighten the oil filter bolt. Make sure the
oil filter bolt is tightened securely to the specified torque.
Oil filter bolt torque:
13 lbf·ft (18 N·m , 1.8 kgf·m)
Improper installation of the oil f ilter can cause serious engine damage.
120
Servicing Your Honda
2
4
5
(4)
(2) oil filter bolt
(3) oil filter cover
3
(5)
(3) (2)
(4) oil filter
(5) O-rings