3.5
Necessary Installation Materials and Accessories Not Supplied
The GTX 3X5 is installed with standard aviation materials. The following items are necessary for
installation, but not supplied.
•
Wire (MIL-W-22759/16 or equivalent)
•
Shielded wire (MIL-C-27500 or equivalent)
•
Aircraft grade category 5 Ethernet cable is necessary for installations utilizing the HSDB
interfaces
•
Mounting hardware
•
Circuit breaker of applicable rating
•
Tie wraps and/or lacing cord
•
Ring terminals for grounding
•
Coaxial cable (RG-400 or equivalent)
•
Coax connectors – BNC connectors for the transponder antenna and TNC connectors for the GPS
antenna
•
Approved pressure altitude source
3.6
Necessary Special Tools
NOTE
Insertion/extraction tools from ITT Cannon are all plastic. The others are plastic with
metal tips.
Some connectors use crimp contacts. Use crimp tools in table 3-6 to make sure reliable crimp contact
connections for the rear D-sub connectors are correct.
Manufacturer
Military PN
Positronic
ITT Cannon
AMP
Daniels
Astro
190-01499-02
Rev. 4
Table 3-6 Recommended Crimp Tools
Hand Crimping Tool
M22520/2-01
9507-0-0-0
995-0001-584
601966-1
AFM8
615717
22-28 AWG (P3251, P3252)
Positioner
M22520/2-09
9502-4-0-0
995-0001-739
601966-6
K42
615725
GTX 3X5 Transponder TSO Installation Manual
Insertion/Extraction
Tool
M81969/14-01
M81969/1-04
M81969/1-04
000849490
274-7048-000MIL
91067-1
2031838-1
M81969/14-01
M81969/1-04
M81969/14-01
M81969/1-04
Page 3-7