Downloading An Electronic Copy; Contact Us - Philips HTS3051B/F8 User Manual

Problem
Cannot find a JPEG file.
Cannot find an MP3 and
Windows Media™ Audio file.
Error message appears when I
select "Auto" in the "Player Menu".
Cannot connect to the network.
Cannot connect to the network while
my PC is connected to the network.
The capacity of the SD card
decreased.
MPEG-2 video and audio on the SD
card cannot be played back.
The contents of the card cannot be
read.
Cannot use the BD-Live function or
download of data does not perform
properly.
Cannot play back BD-video
(BD-ROM Profile 2.0).
Radio reception is poor.

Downloading an Electronic Copy

To obtain an electronic copy of this manual :
1) Point your browser to www.philips.com/support.
2) Choose your country of location.
3) Enter the model number or a keyword in the "Find your product" field. Alternatively, you can browse the catalog.
4) Click the description or model.
5) Under Product support, click "User manuals".

Contact Us

If you cannot resolve your problem, refer to the FAQ for this Home Theater System at www.philips.com/support.
If the problem remains unresolved, contact the Customer Support Center in your country.
Note
• Do not attempt to repair the Home Theater System yourself. This may cause severe injury, irreparable damage to
your Home Theater System or void your warranty.
• Please have available your Home Theater System model and serial number before contacting us.
These numbers are available on the cabinet, as well as on the packaging.
56 EN
TROUBLESHOOTING
Tip
Make sure that the selected group (folder) does not contain more than
9,999 files for BD / DVD / SD card, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Make sure that the selected folder does not contain more than 9,999 files for
BD / DVD / SD card, and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or .WMA
for Windows Media™ Audio.
Make sure that the unit is connected to the PHILIPS brand EasyLink TV and
the "EasyLink (HDMI CEC)" is set to "On".
This error message may appear when your TV's OSD language is not
supported by this unit.
Check if the LAN cable connection is properly made.
Turn on the modem or broadband router.
Check the network settings.
Check if the broadband router and/or modem is correctly connected.
Check the "BD-Live Setting".
When connecting directly to a modem via a LAN cable, you might need to
power cycle the modem to reset settings on the modem.
Check the content of your Internet service contract to see if your Internet
Service Provider prevents multiple terminals connecting at the same time.
Data may be written to the SD card when a BD-video that supports the
virtual package is used and an SD card is in the slot.
MPEG-2 is noncompliant on this unit.
The card is not compatible or the contents on the card may be damaged.
Turn off and then turn the unit on again.
Insert an SD card with enough capacity(1GB or more).
Check if an SD card is correctly inserted.
Make sure the write-protect switch on the SD card is not enabled.
Insert an SD card(1GB or more) which is formatted on this unit.
Some discs with BD-Live function require memory when playing back the
content.
Do not remove the card during playback.
Make sure the write-protect switch on the SD card is not enabled.
If the signal is too weak, adjust the antenna or connect an external antenna
for better reception.
Increase the distance between this unit and your TV or VCR.
Tune in to the correct frequency.
Place the antenna further away from any equipment that may be causing
the interference.