Connection Speed
You can set connection speed as your preference. (The
default setting is "Auto".)
1) Follow steps 1) to 4) in "Connection Test" on page
48.
2) Use [K / L] to select "Enable(Custom)", then press
[OK].
3) Use [K / L] to select "Connection Speed", then press
[OK].
4) Use [K / L] to select the desired setting, then press
[OK].
"Auto":
Set the appropriate connection speed automatically, in
accordance with your network environment.
"10BASE Half":
Set the connection speed to "10BASE Half".
"10BASE Full":
Set the connection speed to "10BASE Full".
"100BASE Half":
Set the connection speed to "100BASE Half".
"100BASE Full":
Set the connection speed to "100BASE Full".
5) Press [BACK
] to go back to the previous screen,
or press [
(home)] to go back to the home menu.
Note
• Choose a connection speed in accordance with your
network environment.
• The network connection may be disabled depending
on the device, when the settings are changed.
SETUPS
BD-Live Setting
You can limit Internet access for BD-Live discs. (The default
setting is "Allow".)
1) Follow steps 1) to 4) in "Connection Test" on page
48.
2) Use [K / L] to select "Enable(Custom)", then press
[OK].
3) Use [K / L] to select "BD-Live Setting", then press
[OK].
4) Use [K / L] to select the desired setting, then press
[OK].
"Allow":
Internet access is permitted for all BD-Live contents.
"Limited Allow":
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates is prohibited.
"Prohibit":
Internet access is prohibited for all BD-Live contents.
5) Press [BACK
or press [
(home)] to go back to the home menu.
Network Status
You can check the status of network settings.
1) Follow steps 1) to 4) in "Connection Test" on page
48.
2) Use [K / L] to select "Enable(Custom)", then press
[OK].
3) Use [K / L] to select "Network Status", then press
[OK].
• Network setting list will be displayed.
• MAC address of this unit will be displayed in the list.
4) Press [BACK
or press [
(home)] to go back to the home menu.
Disable
home
"Settings"
Deactivate all the network connection and settings.
1) Follow steps 1) to 4) in "Connection Test" on page
48.
2) Use [K / L] to select "Disable", then press [OK].
3) Use [K / L] to select "Yes", then press [OK].
4) Press [BACK
or press [
(home)] to go back to the home menu.
Note
• The network connection can be reactivated by
setting the network connection to "Enable(Easy)" or
"Enable(Custom)".
] to go back to the previous screen,
] to go back to the previous screen,
"Advanced
"Network
"Others"
Setup"
Connection"
] to go back to the previous screen,
EN
"Disable"
EN
51