Instruments
Display configuration
This menu gives access to the following
settings:
-
"Choice of units",
-
"Date and time adjustment",
-
"Display parameters",
-
"Brightness".
46
Adjusting the date and time
F Press the "7" or "8" button to display
the "Display configuration" menu, then
press "OK".
F Press the "5" or "6" button to select the
"Date and time adjustment" button, then
press "OK".
F Press the "7" or "8" button to select the
setting to modify. Confirm by pressing
"OK", then modify the setting and confirm
again to save the modification.
F Adjust the settings one by one, confirming
with the "OK" button.
F Press the "5" or "6" button, then the "OK"
button to select the "OK" box and confirm
or the "Back" button to cancel.
As a safety measure, configuration of
the multifunction screen by the driver
must only be done when stationary.