CITROËN C4 Handbook page 43

Trip computer
Once the "TRIP COMPUTER" menu has been
selected, you can start diagnostics of the status
of the equipment (active, not active, faulty).
Date and time
Once the "DATE AND TIME" menu has been
selected, you have access to the following
settings:
- year,
- month,
- day,
- hours,
- minutes,
- 12 or 24 hour mode.
F Once you have selected a setting, press
the "7" or "8" buttons to change its value.
F Press the "5" or "6" buttons to switch
respectively to the previous or next setting.
F Press the "OK" button to record the
change and return to the normal display or
press the "Back" button to cancel.
Languages
Once the "LANGUAGES" menu has been
selected, you can choose the language used by
the display, from a pre-defined list.
Vehicle parameters
Once the "VEHICLE PARAM" menu has been
selected, you can activate or deactivate the
following equipment:
- "PARK BRAKE" (Automatic electric parking
brake; refer to the "Driving" section).
- "BEND LIGHTING" (Directional lighting;
refer to the "Lighting and visibility" section),
- "AUTO HEADLAMPS" (Automatic
illumination of headlamps; refer to the
"Lighting and visibility" section),
- "REAR WIPE ACT" (Rear wiper coupled
with reverse gear; refer to the "Lighting and
visibility" section),
- "GUIDE LAMPS" (Guide-me-home lighting;
refer to the "Lighting and visibility" section),
- "ELECTRIC BOOT" (Selective unlocking of
the boot; refer to the "Access" section),
- "CABIN SELECT" (Selective unlocking;
refer to the "Access").
As a safety measure, configuration of
the multifunction screen by the driver
must only be done when stationary.
Instruments
1
41