CITROËN C4 Handbook page 171

Hide thumbs Also See for C4:
Table of Contents

Advertisement

Starting the engine
With the parking brake applied and the gearbox 
in neutral or position N or P:
F  depress the clutch pedal fully (manual 
gearbox),
or
F  press the brake pedal firmly (automatic 
gearbox),
F  insert the key into the ignition switch; the 
system recognises the code,
F  unlock the steering column by 
simultaneously turning the steering and 
the key.
In certain cases, you may have to apply 
more force to the steering (wheels on 
full lock, for example).
F  With a petrol engine, operate the starter 
motor by turning the key to position 3
without pressing the accelerator pedal, 
until the engine starts. Once the engine is 
running, release the key.
F  With a Diesel engine, turn the key to 
position 2, ignition on, to operate the 
engine pre-heating system.
Wait until this warning lamp goes off 
in the instrument panel then operate 
the starter motor by turning the key 
to position 3 without pressing the 
accelerator pedal, until the engine 
starts. Once the engine is running, 
release the key.
In wintry conditions, the warning lamp 
can stay on for a longer period. When 
the engine is hot, the warning lamp 
does not come on.
If the engine does not start straight 
away, switch off the ignition. Wait a 
few moments before operating the 
starter motor again. If the engine does 
not start after several attempts, do not 
keep trying: you risk damaging the 
starter motor or the engine. Contact 
a CITROËN dealer or a qualified 
workshop.
In temperate conditions, do not leave 
the engine at idle to warm up but move 
off straight away and drive at moderate 
speed.
Never leave the engine running in 
an enclosed area without adequate 
ventilation: internal combustion 
engines emit toxic exhaust gases, 
such as carbon monoxide. Danger of 
intoxication and death!
In very severe wintry conditions
(temperatures below -23°C), to ensure 
the correct operation and durability of
the mechanical components of your 
vehicle, engine and gearbox, it is 
necessary to leave the engine running 
for 4 minutes before moving off.
Driving
6
169

Advertisement

Table of Contents
loading

Table of Contents