Upgrading And Provisioning; Firmware Upgrade Procedure; Figure 12: Firmware Upgrade Page - Grandstream Networks HT801 Administration Manual

UPGRADING AND PROVISIONING

The HT801/HT802 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP or
HTTP/HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
fw.ipvideotalk.com/gs

Firmware Upgrade procedure

Please follow below steps to upgrade the firmware version of your HT801/HT802:
1. Access your HT801/HT802 UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings > Firmware Upgrade and Provisioning page, and enter the IP
address or the FQDN for the upgrade server in "Firmware Server Path" field and choose to
upgrade via TFTP or HTTP/HTTPS.
5. Make sure to check "Always Check for New Firmware".
6. Update the change by clicking the " Apply" button at the bottom of the page. Then "Reboot" or
power cycle the HT802 to update the new firmware.

Figure 12: Firmware Upgrade Page

HT801/HT802 Administration Guide
P a g e | 47