JVC EX-D11J Service Manual page 9

3.1.3 Removing the front panel assembly
(See Figs.7 and 8)
• Remove the side panels L/R and top panel assembly.
(1) From the bottom side of the main body, remove the two
screws E attaching the front panel assembly. (See Fig.7.)
(2) From the forward side of the micom board, disconnect the
card wire from the connector CN426. (See Fig.8.)
(3) From the bottom and both sides of the main body, release
the joints (d, e) of the front panel assembly and remove the
front panel assembly in the direction of the arrow. (See
Figs.7 and 8.)
3.1.4 Removing the tuner
(See Fig.9)
• Remove the side panels L/R and top panel assembly.
(1) From the back side of the main body, remove the two
screws F attaching the tuner to the rear panel.
(2) Disconnect the card wire from the connector
tuner.
Front panel assembly
E
CN1 on the
Fig.7
CN426
e
Fig.8
CN1 Tuner
Fig.9
d
Micom board
Rear panel
F
(No.MB544)1-9