Audiovox Rampage ACD-88 Owner's Manual page 7

indication 5 seconds after the last
adjustment or when another function is
activated.
5 5 5 5 5
TREBLE CONTROL
To adjust the treble level, first select the
Treble mode by pressing the SEL button
so the TRB indication appears on the display
panel. Within 5 seconds of choosing the
Treble mode, press the audio adjust Down
2
button to decrease the treble response
or the Up button to increase it as desired.
The level will be shown on the display panel
from a minimum TRB 10 to a maximum of
TRB 10 (TRB 00 indicates flat response).
The display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
6 6 6 6 6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the
SEL button 3 so the BAL indication appears
on the display panel. Within 5 seconds of
choosing the Balance mode, press the audio
2
adjust Down button
balance to the left channel speakers or the
Up button to adjust it to the right channel
speakers. The balance position will be shown
on the display panel from BAL 10L (full left)
to BAL 10R (full right). When the volume
level between the left and right speakers is
equal, L=R will be shown on the display
panel. The display will automatically return
to the normal indication 5 seconds after
the last adjustment or when another function
is activated.
7 7 7 7 7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first
select the Fader mode by pressing the SEL
button
the display panel. Within 5 seconds of
choosing the Fader mode, press the audio
adjust Down button
rear speaker balance to the front speakers
or the Up button to adjust it to the rear
3
speakers. The fader position will be shown
on the display panel from FAD 10R (full rear)
to FAD 10F (full front). When the level
between the front and rear speakers is equal,
F=R will be shown on the display panel. The
display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
8 8 8 8 8
When listening to music at low volume
levels, this feature will boost the bass and
treble ranges to compensate for the
characteristics of human hearing. Press and
hold the BND/LOUD button for more than 2
seconds to activate this feature; the LOUD
ON indication will appear on the display panel
for 5 seconds, and LOUD will also appear
and remain. Pressing the button again for
to adjust the stereo
more than 2 seconds will deactivate the
feature (LOUD OFF indication will appear
on the display panel for 5 seconds, and
LOUD will also disappear).
9 9 9 9 9
Press this button momentarily to mute the
volume from the system ( MUTE will appear
blinking on the display panel). Pressing the
button again or pressing the audio adjust
Up/Down buttons
level setting in use before the Mute function
was activated.
During disc play, pressing this button will
mute disc audio and disc play will stop.
During this time, the
3
so the FAD indication appears on
2
to adjust the front-
LOUDNESS CONTOUR (LOUD)
AUDIO MUTE SELECTOR (MUTE)
2
will return to the volume
indication will remain
7 7 7 7 7