Receive Settings - Fax - Epson ET-16500 User Manual

Setting
Auto Rotation
Parent topic:

Receive Settings - Fax

Set the receive options you want to use for incoming faxes.
Setting
Receive Mode
Distinctive Ring
Rings to Answer
Options
On
Off
Setting Up Fax Features Using the Product Control Panel
Options
Manual
Auto
All
Single
Double
Triple
Double&Triple
2 to 9
Description
Select On to rotate the scanned documents 90
degrees when an A4 or Letter size document has
been loaded long edge first into the ADF. The
document is sent at A4 or Letter size. If this option is
disabled, the document is sent at A3 size. If the
recipient's fax machine does not support A3 size, the
document is automatically reduced in size. This
setting is not applied to color faxes and monochrome
faxes sent using the Direct Send function.
Description
Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the
product.
Automatically receives and prints faxes.
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
product can receive faxes on the correct number of
rings. All works for phone lines that do not use this
service.
Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to for answering a call.
161