Sharp TU-X1U Service Manual page 10

TU-X1U
5. Remove the DC Output PWB from Rear Panel.
6. Remove the lock screws, two hexagon shaft screws, AC Inlet and one tuner nut from the Rear Panel, and detach the Rear Panel.
7. Remove the two lock screws, from the Rear Panel, and detach the Fan and Fan Angle.
8. Remove the one lock screw, and detach the Sub Terminal unit.
SUB TERMINAL Unit
9. Remove the three lock screws from the Terminal PWB, and detach the Terminal Unit.
DC OUT Unit
Fan
8
Fan Angle
9
2 – 2
5
AC Inlet
7
6
Back Plate
TERMINAL Unit