Rear Panel - Panasonic DMP-BD85EB Service Manual

3. Confirm the Tray door spring is attached as following.

10.1.6. Rear Panel

1. Remove the 6 screws (A) and screw (B).
2. Unlock 2 locking tabs (A) to remove the Rear Panel.
10.1.7. BDP/Digital P.C.B. Module
CASE 1:
When replacing the pair of BD Drive and Digital P.C.B.
(Do not remove OPU FFC and 18 pin FFC between BD
Drive and Digital P.C.B.)
1. Remove the 4 screws (A) to remove Front Angle.
2. Remove the wire with connector (A).
3. Remove the connector (B).
4. Remove the 5 screws (A) to remove Digital P.C.B..
5. Remove the 4 screws (B) to remove BD Drive.
6. Put Digital P.C.B. on BD Drive and remove BDP/Digital
P.C.B. Module.
CASE 2:
When replacing the BD Drive alone or the Digital P.C.B.
alone. (Not replacing as "BDP/Digital P.C.B. Module".)
1. Remove the 4 screws (A) to remove Front Angle.
29