Rear Panel - Panasonic DMP-BDT110GC Service Manual

9.1.4.3. LED P.C.B.
1. Release the tabs.
2. Remove the LED P.C.B..
9.1.4.4. Application of the Lubricant to
Door Ass'y
1. Lubrication points on door ass'y are shown in the figure
as below.
2. Since the replaced parts are not lubricated, please apply
lubricant to the specified points (RFKXGUD24).
3. Use Cotton Swab to spread thinly.
9.1.4.5. How to assemble Door ass'y.
1. Lean the right side of the door shaft against the side of
relevant holes of the front panel, and insert the door shaft
into the hole of the front panel.
2. Move the door leftward, and insert the 4 shafts of the front
panel into the shaft hole of the door.
3. Install the door stopper.
4. Firstly attach the door spring to the front panel.
5. Stick the spring to the door with the door closed.
9.1.5.

Rear Panel

1. Remove the 4 Screws (A) and Screw (B).
2. Unlock 2 locking Tabs (A) to remove the Rear Panel.
9.1.6. Power P.C.B.
1. Remove the 2 connectors.
2. Remove the 3 Screws (B).
32