Panasonic DMP-BD85EB Service Manual page 30

2. Remove the OPU FFC, and isolate it with an ESD pre-
vention bag (RPFC0114).
3. Remove the 18 pin FFC.
4. Remove the wire with connector (A).
5. Remove the connector (B).
6. Remove the 4 screws (A) to remove BD Drive.
7. Remove the 5 screws (B) to remove Digital P.C.B..
Caution for assemble:
When remove the ESD prevention bag, do not touch the
OPU FFC conductive surface to avoid ESD damage.
10.1.8. Power P.C.B.
1. Remove the wire with connector (A).
2. Remove the 4 screws (A) to remove Power P.C.B..
30