Philips CRT TV Owner's Manual page 7

TV VCR
Cable DBS
PreAmp Tuner
LD DVD
CD CDR
TV
power 1 2 3
source
4 5 6
freeze 7 8 9
surf
0
Page 6 Page 7
TV control panels on the Pronto Remote Control
When you first tap the touchscreen, Home is displayed.
Here you'll find a button for selecting the devices that Pronto is set up to operate. If
you get lost, you can always go Home. Just tap the
buttons to choose a device.
Tap the TV button.
1/3 This is the first control panel of three
Macro menu: refer to the Pronto manual.
Tap to return to the Home control panel.
Tap the arrow up to proceed to the previous control panel.
Tap the arrow down to proceed to the next control panel.
TV You are in TV mode
power Tap the power button to turn on the TV.
The TV is never fully powered off completely unless it is physically unplugged.
When the set is turned off, no LED lights up.
source Tap repeatedly to select
connected the peripherals (see p. 31).
Also see Settings, Source, p. 28, to name the AV inputs.
freeze See Settings menu, General, Freeze format, p. 24 where you can select among
three modes to be displayed when the freeze button is tapped: Freeze, Replay,
Photo Finish.
When the mode is
picture.The audio continues to play.
When the mode is
stored video in a single PIP window.Tap the OK button, in panel 2 or 3, to
display a few seconds of a new stored video picture.
When the mode is
windows of stored video pictures.Tap the OK button, in panel 2 or 3, to display
a new series of frozen pictures.
Note: continuing to hold the freeze button down will cycle the TV through the various
modes (Freeze, Replay, Photo Finish).
Tap again to return to live picture.
12
Tap the number buttons to select a TV channel.
surf With this feature you can easily switch between different TV channels/sources
that currently interest you. In the menu system, you can set surf to two- or nine
channel. (See Settings, General, Surf, p. 23.)
Tap this button to select the previously viewed TV channel or source in case of a
Two channel surf, or to select the surf ring in case of a Nine channel surf.
In case of a Nine channel surf, a list appears at the right side of the television
screen. On top, the most recently added.The puck is on the channel number
currently viewed.
Tap the button again to tune to the next channel in the list or go to panel 2
surf
or 3 and tap cursor up/down to select the desired TV channel of the list.
Tap the OK button or wait for the time out to dismiss the Surf list.
To add a new channel: tune to the channel or source you wish to add.
Tap the button.Tap the cursor right to add.
surf
If there are already nine channels/sources in the list, the one at the bottom of
the list will be removed.
To remove a channel: select the channel number you want to remove.
Tap the button.Tap the cursor right to remove.
surf
Tap the OK button, in panel 2 or 3, or wait for the time out to dismiss the Surf
display.
, , , ,
TV SIDE AV1 AV2 AV3
: tap the freeze button to activate/de-activate a frozen
Freeze
: tap the freeze button to redisplay a few seconds of a
Replay
: tap the freeze button to display 12 PIP
Photo Finish
Pronto remote control
button.Tap one of the
or according to where you
AV4
7