Philips CRT TV Owner's Manual page 34

Pr
Pb
Y
AV 4
IN
VIDEO 1080i - 2Fh
Pr / R
H Pb / B L
V Y / G R
AUDIO
Connect Accessory Devices
34
Peripherals connected to AV3
&
AV 3
IN
VIDEO
L AUDIO
R AUDIO
S VIDEO
é
AV4 Digital High Definition input
There are three possible ways to connect your Accessory Devices to the
input.
• In case of a peripheral with CVBS output, connect the video cable to the
video input of the TV.
• In case of a peripheral with S-VHS output, connect the video cable to the
input of the TV.
S-VIDEO
• In case of a peripheral with component video cables, connect them to the
, and inputs
Pb Pr Y
AND
(in order to have correct picture reproduction).
Always connect the audio cables to the peripheral's
and to the and
L AUDIO R AUDIO AV3
When you have a Digital Antenna cable connected to a digital Set top Box,
connect the Set top Box to the
Connect a Set top Box with 2 Fh RGB output to the H, V, R, G and
and to the and
L R AUDIO
Connect a Set top Box with 2Fh Pr, Pb,Y output to the Pr, Pb and Y jacks
and to the and
L R AUDIO
See also the manual of your High Definition Set top Box.
Note: This television is designed to accept high definition signal standards 480p and -
1080i as specified by the Electronic Industries Association standard EIA770.3.
Set-top boxes from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or
even combinations of these on your screen, check if the connections are done in
the right way:
- for Y, Pb, Pr 2Fh: check if the cable colors match with the input connector colors
- for RGB-HV 2Fh: check additionally if the H and V cables are connected to the
respective H and V input connectors, and if necessary exchange
both connections.
also connect a video cable to the video input
AUDIO L
jacks on the TV.
input.
AV4 IN VIDEO 2 Fh
jacks.
jacks.
AV3
and jacks
R
jacks
B