When Stop Frequency Is Greater Than 7 Ghz - HP 85052c User Manual

When Stop Frequency is Greater than 7 GHz

GOOD
Insert Air Line
BAD
Check Concentricity
GAP
Extended Position with Air Line Installed
If the stop frequency is greater than 7 GHz, install the 7-32
Move the Port 1 nut to its standard position and carefully
l
insert the air line into the male connector using the
installation tool.
Squeeze the installation tool (closing the slot) to release
l
the center conductor. Then pull the tool away from the
connector, leaving the outer and the center conductors in
place.
Examine the outer and center conductors to see that they
l
are in place and concentric. If the center conductor is not
centered, use the installation tool to align it.
Move the adapter nut to its extended position.
l
19