Table of Contents
Advertisement
Chapter 3, Operating Overview
Setting an RF Generator/Analyzer Frequency Offset
Setting an RF Generator/Analyzer Frequency Offset
NOTE:
To Turn Off RF Frequency Offset
To Change the RF Frequency Offset
62
You can set a fixed frequency offset between the RF Generator and the RF
Analyzer. At power-up and instrument preset this feature is ON with a
transmit/receive frequency offset of 45 MHz.
A 45 MHz offset is required for making a call or making measurements in CDMA mode.
1. Access the CONFIGURE screen.
2. Position the cursor below the RF Display field and select Freq.
3. Set the RF Offset to Off.
1. Access the CONFIGURE screen.
2. Position the cursor below the RF Display field and select Freq.
3. Set the RF Offset to On.
4. Enter an offset frequency ((Gen)-(Anl)).
Advertisement
Table of Contents
