PRESONUS StudioLive AR-Series Owner's Manual page 94

4 Studio One Artist Quick Start
4.3 Creating a New Song
3. From the Inputs tab, you can enable any or all of the inputs on your StudioLive
AR mixer that you'd like to have available. We recommend that you create a mono
input for each of the inputs on your interface. If you plan on recording in stereo,
you should also create a few stereo inputs. You can give each input a custom name
by simply clicking on the default name. Press the TAB key to edit the next name.
4. Click on the Outputs tabs to enable any or all of the outputs on your StudioLive
AR Mixer. In the lower right corner, you will see the Audition select menu. This
allows you to choose the output from which you will audition audio files prior
to importing them into Studio One Artist. In general, you will want this to
be the main output bus. You can give each output a custom name by simply
clicking on the default name. Press the TAB key to edit the next name.
Power User Tip: If you would like this I/O configuration to be the same
every time you open Studio One, click the Make Default button.
StudioLive™ AR-Series Software
Library Reference Manual
42