AEG L61470BI User Manual page 15

If you have chosen a delayed start with
theDelay start button, the appliance will
begin the countdown.
If you set an incorrect option, the yellow
indicator of the Start/Pause button
flashes 3 times. The display shows the
message Err for some seconds.
10.5 Starting a programme
with the delay start
Set the delay start before starting the
programme.
• After having set all the required
options, press the Delay start button
repeatedly to set the required delay.
The wash programme can be delayed
from 30 min. - 60 min. - 90 min., 2
hours and then by 1 hour up to a
maximum of 20 hours.
The indicator
display.
• Press the Start/Pause button.
The appliance starts the countdown
of the delay start.
When the countdown is completed,
the programme starts automatically.
The set delay time value appears on
the display for about 3 seconds, then
the duration of the programme
appears again.
You can modify or cancel the delay time
at any moment, before pressing the
Start/Pause button.
The door will be locked throughout the
delay time. If you wish to add laundry in
the appliance during the delay time,
press the Start/Pause button to pause
the appliance. When the Door indicator
goes off , the door can be opened. Add
the laundry, close the door and press the
Start/Pause button again.
Cancelling the delayed start
• Press the Start/Pause button to pause
the appliance;
• Press the Delay start button until the
symbol ' is displayed;
• Press theStart/Pause button again to
start the programme.
appears on the
The set delay can be
changed only after you have
set the washing programme
again.
The Delay Start cannot be set with Drain
programme.
10.6 Altering an option or a
running programme
It is possible to change some options
before the programme operate. Before
you make any change, you must press
the Start/Pause button to pause the
appliance.
Changing a running programme is
possible only by resetting it.
Turn the programme dial to Off and then
to the new programme position.
Press the Start/Pause button again to
start the new programme. The washing
water in the tub will not be drained.
10.7 Interrupting a
programme
Press the Start/Pause button to interrupt
a programme which is running, the
corresponding indicator starts flashing.
Press the Start/Pause button again to
restart the programme.
10.8 Cancelling a running
programme
Turn the programme dial to Off to cancel
a programme which is running. Now you
can select a new programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.9 Opening the door
While a programme or the delay start
operates, the appliance door is locked.
If you need to open the door, press the
Start/Pause button to pause the
appliance.
ENGLISH 15