Polycom IP 5000 User Manual page 7

Go to Address and enter PBXware extension number. Example: 1003.
Go to Server 1 and press Select button.
Press Edit button to edit Address line and enter PBXware IP address. Example 192.168.1.10.
Then press the Ok button.
Press the Back button.
Go to Authentication and press Select button.
Press Edit button to edit User ID enter PBXware extension number. Example: 1003. Then
press the Ok button.
Go to Password and press Edit button, enter secret of the extension as received in the e-mail
associated with this extension. Example: _%Z4M3*Ts9y7. Then press the Ok button.
Press Back button twice, then press Select button to Save Configuration.
If everything is done as above described, you should have successfully registered your phone
to PBXware. Dial *123 to verify registration.
DNS SRV
DNS SRV
This chapter describes how to use a DNS SRV record which specifies the location of the
PBXware. NOTE:
Systems can provide service to set up this for you.
Check if the DNS SRV is enabled in your PBXware
Contact your PBXware administrator to find out if the DNS SRV is enabled in your PBXware,
or if you have access to the PBXware you can check this yourself.
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
Navigate to Settings: Servers. Click on the server corresponding edit button.
In Auto Provisioning group, make sure Use DNS SRV when possible: is set to Yes. If it is
set to No or N/A, set to Yes and click on the Save button.
extensions configured for Auto Provisioning.
Configure Line
Press the Menu button on your phone.
Go to Settings and press Select button.
Go to Advanced and press Select button.
Enter password and press Enter button. Please note, factory default password is 456.
Your DNS Server needs to be configured correctly for this to work. Bicom
NOTE: You must re-save all your